Used OEM Dodge ABS Pump & Module — Buyer's Guide & Replacement Cost

Published by GreenGears Auto  |  7 min read  |  ABS System Guide

The ABS warning light is one of the most misdiagnosed faults in automotive repair. Many owners replace the ABS pump immediately after the light comes on — only to find the light returns because the actual fault was a wheel speed sensor that costs $35. This guide walks through how to diagnose an ABS pump failure correctly, what a used OEM pump costs vs new, and what to check before ordering.

What Is a Dodge ABS Pump & Module?

The ABS pump assembly — also called the HCU (Hydraulic Control Unit) or ABS modulator — combines two components: the hydraulic valve block and pump motor that physically modulates brake pressure, and the ABS control module that receives wheel speed sensor data and commands the pump. On many vehicles these are sold as a combined assembly. On others they are separate. Always confirm which component has failed before ordering a replacement.

Dodge platforms share components extensively across the Stellantis family — Chrysler, Jeep, and Ram — meaning used OEM availability is typically good and cross-referencing is important before ordering.


Diagnosing Dodge ABS Pump & Module Failure

ABS pump failure is frequently misdiagnosed because the warning light triggers for many unrelated faults. Always pull chassis fault codes (C-codes) with an ABS-capable scanner before condemning the pump.

C0265 / C0267 — ABS Motor Relay / Pump Motor Fault

These codes confirm the ABS pump motor itself has failed electrically. The relay powering the pump motor is not completing its circuit, or the motor has an open or short internally. This is a genuine pump failure — the unit needs replacement.

C0H00 / C0242 — ABS Control Module Internal Fault

The ABS computer has failed internally. On vehicles where the module is integral to the HCU assembly, the entire unit must be replaced. On vehicles with a separate module, only the module needs replacement — confirm your vehicle's configuration before ordering.

C1234 / C1235 / C1236 / C1237 — Wheel Speed Sensor Faults (NOT the pump)

This is the most common misdiagnosis. Wheel speed sensor faults disable the ABS system and trigger the warning light — but the pump is functioning perfectly. Each code corresponds to a specific wheel. A wheel speed sensor costs $25–$80. Always check for these codes first.

ABS, Traction Control, and Stability Control Lights All On

When the ABS pump fails, traction control and ESC — which depend on the same pump — also disable simultaneously. All three warning lights coming on together is a strong indicator of pump or module failure rather than a sensor fault, which typically illuminates only the ABS light.

⚠️ Basic OBD Scanners Cannot Read ABS Fault Codes The ABS warning light triggers C-codes (chassis codes), not P-codes (powertrain codes). A basic code reader will show no faults even when the ABS light is on. An ABS-capable scanner is required to identify the actual fault before any parts are ordered.

Used OEM vs New vs Aftermarket — Cost Comparison

Option Typical Cost Key Consideration
New OEM (Dealer) $450–$1,800 Maximum reliability but rarely necessary — ABS pump hydraulics don't wear like mechanical components
Used OEM (GreenGears) $95–$420 Factory original from documented low-mileage donor. Sealed hydraulics unaffected by donor mileage. 15-day warranty.
Remanufactured $180–$650 + core Quality varies by rebuilder. Core charge ($80–$200) adds to total cost.
Aftermarket (new) $120–$380 Pressure calibration and solenoid response may differ from OEM — can cause persistent fault codes on some platforms.
🔧 ABS Bleed Is Mandatory After Replacement Any ABS pump replacement requires a scan-tool-controlled ABS bleed procedure to purge air from the hydraulic unit. A standard gravity or pressure bleed does not reach the ABS modulator chambers. Skipping this step causes a spongy pedal and may trigger fault codes on an otherwise good pump.

What to Confirm Before Ordering a Used OEM Dodge ABS Pump & Module

  • Confirm fault codes are pump codes (C0265, C0267, C0242) — not wheel speed sensor codes (C12XX) before ordering
  • Confirm whether your vehicle has ABS only, or ABS with traction control and ESC — different pump configurations
  • Match the part number exactly — ABS assemblies differ between 2WD and AWD on many platforms
  • Provide your VIN — ABS assembly part numbers can change mid-production-year
  • Confirm with your installer whether VIN programming is required after installation for your platform
  • An ABS bleed procedure using a scan tool is required after any pump installation — budget for this

Used OEM Dodge ABS Pump & Module — 14 Parts Available

All units sourced from quality-inspected US salvage donors. Free shipping to the contiguous US. 15-day returns from confirmed delivery. Provide your VIN before ordering for fitment confirmation.

Used OEM 2009-2010 Charger 300 Challenger ABS Control Module Anti-Lock Brake Pump Assembly

Used OEM 2009-2010 Charger 300 Challenger ABS Control Module Anti-Lock Brake Pump Assembly

$393

View Part →
Used OEM 2010 Dodge Challenger AT ABS Anti Lock Brake Actuator Pump Assembly Module OEM

Used OEM 2010 Dodge Challenger AT ABS Anti Lock Brake Actuator Pump Assembly Module OEM

$352

View Part →
Used OEM 2008-2009 Dodge Durango Anti Lock Brake Pump Assembly OEM

Used OEM 2008-2009 Dodge Durango Anti Lock Brake Pump Assembly OEM

$351

View Part →
Used OEM 2009-2010 Dodge Caravan Chrysler Town & Country ABS Anti-Lock Brake Pump Assembly OEM

Used OEM 2009-2010 Dodge Caravan Chrysler Town & Country ABS Anti-Lock Brake Pump Assembly OEM

$258

View Part →
Used OEM 2010-2013 Dodge Journey ABS Anti-Lock Brake Pump Module Assembly OEM

Used OEM 2010-2013 Dodge Journey ABS Anti-Lock Brake Pump Module Assembly OEM

$200

View Part →
Used OEM 2004 Dodge Ram 2500 ABS Anti Lock Brake Pump 5.9L 2WD Diesel OEM

Used OEM 2004 Dodge Ram 2500 ABS Anti Lock Brake Pump 5.9L 2WD Diesel OEM

$396

View Part →
Used OEM 2007 Dodge Durango Aspen Abs Anti-lock Brake Pump Module Assembly OEM

Used OEM 2007 Dodge Durango Aspen Abs Anti-lock Brake Pump Module Assembly OEM

$795

View Part →
Used OEM 2006 Dodge Ram 1500 ABS Anti-Lock Brake Pump Assembly Rear Wheel ABS OEM

Used OEM 2006 Dodge Ram 1500 ABS Anti-Lock Brake Pump Assembly Rear Wheel ABS OEM

$289

View Part →
Used OEM 2014-2016 Dodge Ram 1500 Pickup ABS Anti-Lock Brake Pump and Module 68193650AD

Used OEM 2014-2016 Dodge Ram 1500 Pickup ABS Anti-Lock Brake Pump and Module 68193650AD

$990

View Part →
Used OEM 2004-2006 Dodge Sprinter 3500 Anti Lock Brake Pump

Used OEM 2004-2006 Dodge Sprinter 3500 Anti Lock Brake Pump

$729

View Part →
Used OEM 2004-2006 Dodge Sprinter 2500 ABS Pump 4 Dr W/O Electronic Stability Control

Used OEM 2004-2006 Dodge Sprinter 2500 ABS Pump 4 Dr W/O Electronic Stability Control

$299

View Part →
Used OEM 2014-2016 Dodge Ram 1500 Pickup ABS Anti-Lock Brake Pump 68193650AD

Used OEM 2014-2016 Dodge Ram 1500 Pickup ABS Anti-Lock Brake Pump 68193650AD

$790

View Part →
Used OEM 2007 Dodge Truck 1500 2500 3500 Anti Lock Brake Pump Assembly Mega Cab From 08/14/06

Used OEM 2007 Dodge Truck 1500 2500 3500 Anti Lock Brake Pump Assembly Mega Cab From 08/14/06

$300

View Part →
Used OEM 2011 Dodge Ram 1500 ABS Anti-Lock Brake Pump OEM

Used OEM 2011 Dodge Ram 1500 ABS Anti-Lock Brake Pump OEM

$198

View Part →

Can't find your specific application? Contact us with your VIN — we'll search our salvage yard network and confirm availability before anything ships.


Shop Used OEM Dodge Parts — Verified, Warranted, Free Shipping

Every unit from a documented low-mileage US donor. VIN fitment confirmed before dispatch.

📧 support@greengearsauto.com  |  📞 +1 (315) 305-4300

GreenGears Auto — Drive Green. Drive Smart.

🛡️ 15-Day Warranty  ·  🚚 Free US Shipping  ·  ↩️ Returns Accepted  ·  📋 VIN Fitment Verified

Back to blog